Bullseye Power Turbo 76mm Street Billet


Starting At: $1649.99 (Sale Price)


76mm Street Billet

Bullseye Power Street Billet turbochargers feature the race-proven performance of the Bullseye Power V3 Race Cover, Street Billet compressor wheels, and aerodynamic compressor nuts.  Polished compressor covers and stainless V-Band turbine housings are also available!

Compressor Features:

  • 76mm inducer
  • Street Billet
  • Bullseye Power V3 Race Cover
  • 5.5″ inlet
  • Hose or V-Band outlet
  • Polished cover optional
  • Lightweight billet backplate optional (3.5lbs weight savings)

Turbine Options:

Inlet TW Size (mm) A/R  Outlet SS
T-4 Divided 83×74 .90, 1.00, 1.10, and 1.25 V-Band
T-4 Divided 87×80 .90, 1.00, 1.10, and 1.25 V-Band
T-6 Divided 83×74 .90, 1.00, 1.10, and 1.25 V-Band
T-6 Divided 87×80 .90, 1.00, 1.10, and 1.25 V-Band
T-6 Divided 96×88 1.10, 1.32, 1.58, and 1.65 V-Band
V-Band 83×74 1.00 and 1.30 V-Band  SS (7-13lbs weight savings)
V-Band 87×80 1.00 and 1.30 V-Band  SS (7-13lbs weight savings)
V-Band 96×88 1.00 and 1.30 V-Band  SS (13lbs weight savings)

Max Horsepower 
Part Number:
Inducer Size:
Compressor Inlet:
Compressor Outlet:
Hose or V-Band
Turbine Inlet:
T-4, T-6, or V-Band
Turbine Outlet:
29-49 lbs


Purchaser understands and recognizes that off road and racing equipment and services provided by manufactured and/or sold by Distributor are subject to varied conditions due to the manner in which they are to be installed and used. Purchaser further recognizes and agrees that suitability of any part sold or manufactured for a particular application is the purchaser’s decision and that the purchaser is not relying on the skill or judgment of manufactured and/or Distributor regarding suitability of any product or service. Manufacturer and Distributor make no warranties whatsoever, expressed or implied, oral or written to purchasers with regard to off road and racing equipment. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. Buyer agrees to indemnity and hold seller harmless from any claim, action or demand arising out of or incident to the buyer’s installation or use of products purchased from Manufacturer and/or Distributor. All parts are aftermarket replacement parts. No implication is made that these parts are the original car manufacturers, are from the original suppliers, or are approved by them. Before operating vehicle, always utilize safety restrain systems while operating vehicle.


Returns Must be Shipped Directly To Bullseye Power

All returns, repairs, and upgrades must be accompanied by the original Bullseye Power receipt and Return Authorization Form. Turbochargers must be shipped complete with both housings or they will not be serviced. Bullseye Power will not be responsible for damaged wheels that occur during shipping on incomplete turbo shipments. Please remove all oil feed and drain fittings, gaskets and silicone hoses before shipment. Returns for credit must be in unused condition and will not be accepted after 10 days from the original date of purchase and are subject to a 20% handling and restocking fee.

Shipping and Payment

All packages within the USA are shipped via FedEx or UPS ground, unless expedited shipping is requested by the customer. Rush shipments are subject to additional charges and may not be available to certain zip codes. A strict 12:00PM deadline is enforced for orders requiring overnight shipment. All shipments are fully insured. It is the responsibility of the receiver to report any shortages or discrepancies to Bullseye Power within 3 days of receipt of a shipment. Damage must be reported to the carrier (FedEx or UPS) immediately after receipt of a shipment. Keep all packaging materials for any possible inspection required by the carrier. Customer credit cards are not charged until the order is ready for shipment, with the exception of custom or special orders. Custom orders require a 50% deposit before work begins, with the balance required upon completion.

Warranty Information

Bullseye Power provides a one year, limited warranty from the date of sale for the original owner only. Eligibility to be determined at the discretion of Bullseye Power. Abuse, improper installation, modification, or customer-induced damaged to the product is not covered under warranty. This includes oil conatination and starvation, as well as shaft speed, boost, EGT, or drive presssure beyond reasonable levels. Warranty does not cover turbos that have been disassembled. Please contact Bullseye Power before returning any parts. Warranty is limited to replacement of defective parts, and does not cover labor, shipping costs, vehicle down time, or any expenses beyond the replacement of eligible equipment.

Additional information

Weight 30 lbs
Dimensions 11 x 12 x 17 in

Bullseye Power Turbochargers

Turbine Inlet

T-4 Divided, T-6 Divided, V-Band

Trim Level

83×74, 87×80, 96×88


.90, 1.00, 1.10, 1.25, 1.30, 1.32, 1.58, 1.65

Turbine Outlet


Outlet Style

Iron, Stainless Steel


There are no reviews yet.

Be the First to Review “Bullseye Power Turbo 76mm Street Billet”